Astm B 75 Medical Gas Copper Pipe

ABCO ENGINEERING INC takes great pride in the production of Medical Grade Copper Pipes designed for integration into Medical Gas Distribution systems, where an uninterrupted supply of medical gas is indispensable in critical hospital areas such as ICCU, Operation Theater, Wards, Nursery, and more.

These pipes play a pivotal role in ensuring the seamless delivery of medical gases, offering an effective solution to this essential need. Manufactured in strict accordance with EN13348 / BS EN 1057 specifications, our medical-grade copper tubes undergo comprehensive inspections and stringent quality control measures.Astm B 75 Medical Gas Copper Pipe

Our range of medical grade copper tubes spans sizes from 10mm to 108mm OD, featuring wall thicknesses ranging from 0.6mm to 2.0mm in both Half Hard and Hard conditions. Adhering to international standards, the standard length of these pipes is set at 3 meters.

At ABCO ENGINEERING INC, we are committed to producing medical-grade copper pipes that meet and exceed the highest industry standards, ensuring reliability and safety.Astm B 75 Medical Gas Copper Pipe

Particular	Standard
CHEMICAL COMPOSITION	Copper (Cu) + Silver (Ag)	99.90%	Spectro Analysis Done Per Heat As Per Standard Tolerances.
Phosphorous	0.015% To 0.04%
CARBON CONTENT TEST	Determining Lubricant Residue As Total Carbon Content By Measuring Carbon Dioxide Generated.	Tested With Combustion Method As Per EN723:2009
TENSILE/ELONGATION TEST
Temper	Tensile Strength	Elongation	Hardness (Indicative)
As Per EN1773	Common Term	MPa Min.	A % Min	HV 5
R220	Annealed	220	40	(40 To 75)	Specifications Maintained With Help Of In House Testing Facility.
R250	Half Hard	250	30	(75 To 100)
R290	Hard	290	3	(Min. 100)
DRIFTING TEST	Depending On Size And Temper Mandatory/Agreed Terms	Conical Mandrel @ 45º With Tube End Expanding 30º
FREE FROM DEFECT TEST	Eddy Current Test For Detection Of Local Defects	EDDY Current Test Conducted By EN1971
CLEANLINESS REQUIREMENT	Degreased, End Caps	Degreasing And End Caps Are Fixed At Both End Of The Pipe.

Particular

Standard

CHEMICAL COMPOSITION

Copper (Cu) + Silver (Ag)

99.90%

Spectro Analysis Done Per Heat As Per Standard Tolerances.

Phosphorous

0.015% To 0.04%

CARBON CONTENT TEST

Determining Lubricant Residue As Total Carbon Content By Measuring Carbon Dioxide Generated.

Tested With Combustion Method As Per EN723:2009

TENSILE/ELONGATION TEST

Temper

Tensile Strength

Elongation

Hardness (Indicative)

As Per EN1773

Common Term

MPa Min.

A % Min

HV 5

R220

Annealed

220

(40 To 75)

Specifications Maintained With Help Of In House Testing Facility.

R250

Half Hard

250

(75 To 100)

R290

Hard

290

(Min. 100)

DRIFTING TEST

Depending On Size And Temper Mandatory/Agreed Terms

Conical Mandrel @ 45º With Tube End Expanding 30º

FREE FROM DEFECT TEST

Eddy Current Test For Detection Of Local Defects

EDDY Current Test Conducted By EN1971

CLEANLINESS REQUIREMENT

Degreased, End Caps

Degreasing And End Caps Are Fixed At Both End Of The Pipe.

Astm B 75 Medical Gas Copper Pipe

Astm B 75 Medical Gas Copper Pipe

Astm B 819 Medical Gas Copper Pipe

Medical Gas & Plumbing Tube

BS EN 1057 Medical Gas Copper Pipe

Copper Tube for Medical

Copper Plumbing Tube

Corporate Office

Links